BOHE-BT/BOHE-BTI Bluetooth
Hose End Timer (Tap Timer)
I N S T R U C T I O N M A N U A L
Thank you for purchasing DIG’s BOHE-BT or BOHE-BTI Bluetooth Hose End Timer (Tap Timer). This manual describes how to get the timer up and running quickly. After reading this manual and becoming familiar with the basic functionality of the timer, use the manual as a reference for less common tasks in the future.
The BOHE-BT/BOHE-BTI Bluetooth Hose End Timer (Tap Timer) employs the latest in Bluetooth technology using the free DIG BTT app for Android or iPhone. The app can be used to control and program any number of timers for complete control of an outdoor faucet irrigation system. The timer is powered by 2 AA batteries that can last up to 1 year (using name brand alkaline batteries) and is enclosed in a compact, waterproof housing to protect it from the elements.
• Operating pressure: 10 to 120 PSI (.7 to 8.3 bar)
• T emperature range: 38º-130º F (-2º to 54º C)
• Flow range: .1 to 6 GPM (.38 to 30 L/H)
• Power source: 2 AA alkaline batteries (not included)
• USA Connection: Female hose thread inlet (FHT) x male hose thread outlet (MHT) • International Connection: British standard thread for tap (BSP)
• Dimensions: 5.5″ x 3.1″ x 4.3″ (14 cm x 7.9 cm x 11 cm)
• Weight: 8 oz. (227 g)
Timer inlet 3/4″ female
hose thread or BSP
Battery
compartment cap
for 2 AA batteries  1 button for
manual run
and reset
Timer outlet 3/4″
male hose thread
or BSP
DIG’s BOHE-BT & BOHE-BTI Hose End Timers are the easiest Bluetooth® hose end timers to set up and install.
• First, download the DIG BTT app using the iOS App Store, Google Play, utilizing the QR code on the box, or from the DIG website.subjection
• Once the app is installed, open the battery compartment cap on the timer by turning it counter-clockwise.
• Install two, fresh, brand name, AA alkaline batteries (not included). The proper negative and positive orientation is located on the underside of the timer.
• Screw the battery cap back on clockwise until hand tight.
• Attach the timer inlet to the outdoor faucet/spigot or tab and turn clockwise until hand tight.
• Attach a drip irrigation system or garden hose to the timer outlet and turn clockwise until hand tight.
• Open the DIG BTT app from your smartphone or tablet and use the instructions in the App Screens Overview to program and operate the timer.
Controller Scanning Screen
• The DIG BTT app automatically scans for nearby timers when opened. Any DIG Bluetooth timers within 50 feet (15 meters) line of sight will appear on screen.
Your new timer will appear as the BT Hose End Timer.
• Its picture, status (watering -on- or not watering -off-), connection strength, and battery life, will appear alongside it.
• Tap on the timer to connect to it and start programming.
Also available from this screen are the Connection History and Contact Us buttons by tapping the but
ton in the top right. The Connection History allows you to see every controller ever connected to from this phone or tablet. It stores the data it last saw from each controller, but no editing can be done. Deleting an
entry will remove all the saved data for that controller (so, any
passwords set will need to be reentered and any pictures will
have to be retaken). T o delete an entry, tap it and then select the
garbage can in the top right corner. The Contact Us button can be
used to find information about DIG.
Battery life Connection strength Schedule  Overview:program run times. Red lines there is an overlapping start time
Activate or deactivate the program Schedule type
Schedule settings
Up to 5 start times. Select an existing start time to edit/delete.Red start times are overlapping and will not run Run time for valve Home (current page)Controller settings Manual run Home Screen
Once connected, the Home Screen will appear. This screen has everything needed to program the controller.
By default, the controller’s program is off. T o turn it on, push the switch under the “Program” area. It will turn green and the Program area will light up indicating that it can now be modified. The button is shown next to “Activate or deactivate the pro-gram” in the screenshot below.
The controller is ready to be programmed. Simply select the schedule (weekly, even/odd, or cyclical), set your start date or days, add times, and set a duration. The con-troller is updated immediately each time a button is pressed, so there is no need to save or upload to the controller. Whatever is sh
own on screen is already saved to the controller.