摘 要
本文是对通用设备（通用固定带式输送机）的选型计算，需要通过计算选择各组成部件，并着重进行电控系统的分析设计。最后组合成使用于具体条件下的带式输送机。施工设计主要是根据初步设计选择驱动装置、电动机、减速器、变频器、制动器等等部件，从而完成输送机的安装布置图。
最后，在基于本文所做的理论分析的基础上，设计了输送机的保护装置及其电控系统。电控装置核心采用可编程控制器。本文通过对输送机各部件的选型计算和集控系统的设计以使整个系统能够在给定场合下安全可靠的完成预期的任务。
机械论文关键词：固定式带式输送机，选型设计，电控系统
Belt conveyor structure design
ABSTRACT
The design is a graduation project about the fixed belt conveyor used in coal mine. the purpose is to design one set of belt conveyor that can be used safely and dependably on the given occasion.
This article describes the design calculation of choosing the general equipments (the universal fixed belt conveyor ) and the electronic-controlled system, so it needs to choose every part of the belt conveyor though design calculation, and put them together to be used on the occasion.The executive project mainly is according to preliminary design to choice drive, electric motor, reduction gear, Frequency transformer and brake and so on parts, thus completes the conveyer the installment general arrangement.
At last, according to the front theory in this paper, we design the catch equipment and its ce
ntralized-control system. The core of electronic-controlled system uses the programmable logic controller . In the article, through choosing each part of the belt conveyer and the design for centralized-control system, ensure that the belt conveyer could safely and credibility run in given situation.
KEY WORDS:Fixed Belt conveyer，Lectotype Design，Electronic-controlled system
目 录
发布评论